Brigham City Foundation Pros
Foundation Crack Repair in Brigham City, UT
Foundation crack repair in Brigham City with epoxy and polyurethane injection, built for Utah's freeze-thaw cracking. Free estimates.
Serving Brigham City and nearby communities.
Not every crack means a failing foundation. You need to know which kind you're looking at before you decide what to do. Brigham City Foundation Pros repairs foundation cracks across Brigham City's older homes and newer builds alike, sealing hairline settlement lines and structural stair-step cracks with the method matched to the actual cause, not a one-size caulk job.
A lot of the homes we see near the historic core have aging, unreinforced concrete that cracks again each freeze-thaw cycle until it's injected properly. We diagnose the crack type first, then inject epoxy or polyurethane depending on whether it's a strength issue or a water issue.
What's included
What's Included with Foundation Crack Repair
Typically included: crack inspection and classification, surface prep, injection port setup, epoxy or polyurethane injection, surface finishing.
Optional: exterior waterproof membrane over the repaired section, follow-up moisture monitoring, interior drain tie-in if water intrusion is active.
Customer prep: clear access to the crack from inside or outside, move stored items away from the wall, note when the crack first appeared and whether it's grown.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Foundation Crack Repair Process Works
Step 1Crack Inspection
Each crack is examined to determine type, width, and cause.
Step 2Surface Cleaning
Debris and loose material are removed from the crack area.
Step 3Injection Port Setup
Ports are installed along the crack to allow material injection.
Step 4Sealant Injection
Epoxy or polyurethane is injected to fill and bond the crack.
Step 5Surface Finishing
Excess material is removed and the surface is smoothed.
Step 6Final Inspection
The repair is checked to confirm a watertight and stable seal.
Materials
Materials and Methods for Foundation Crack Repair
Crack repair only lasts if the material matches the crack. Here's what we use and why.
Epoxy Injection Resin
Bonds structural cracks for added strength and stability, restoring the wall's original load path.
Polyurethane Foam Sealant
Expands to fill cracks and block water infiltration, the better call when snowmelt is pushing moisture through.
Injection Ports
Allow controlled delivery of sealant into the crack cavity so the fill reaches the full depth, not just the surface.
Surface Primer
Prepares concrete surfaces for proper material adhesion before injection begins.
Masonry Patch Compound
Used to finish and blend repaired surface areas so the wall looks consistent after the work.
Protective Topcoat
Applied to shield the repaired area from moisture exposure going forward.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Foundation Crack Repair Take?
Most crack jobs are quick, but the cure time matters more than the labor time.
- 01
Inspection and quote
same day - 02
Surface prep and port setup
1–2 hours - 03
Injection and cure
24 hours1 visit, full cure over
- 04
Follow-up check
1–2 weekswithin if water intrusion was present
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Foundation Crack Repair
Permit rules vary by jurisdiction. Verify specifics with Box Elder County or the Brigham City building department before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| Crack repair tied to a larger structural underpinning or piering scope | Cosmetic hairline crack sealing |
| Any work that alters load-bearing wall sections | Epoxy or polyurethane injection on a single wall section |
| — | Surface patching and topcoat application |
Need help with permits?
Get a Free EstimateCost
What Does a Foundation Crack Repair Cost in Brigham City?
Cost depends mostly on crack length, count, and whether water is actively coming through. These are ballpark ranges, not a fixed quote. Call for a free estimate and we'll walk the crack in person before quoting.
| Project type | Typical range | What’s included |
|---|---|---|
| Single hairline crack | $300–$800 | cleaning, epoxy injection, surface finish. |
| Multiple cracks or longer run | $800–$2,000 | several injection points across one or more walls. |
| Active water intrusion crack | $1,000–$2,500 | polyurethane injection plus exterior sealant. |
| Structural crack tied to settlement | $1,500–$4,000+ | injection paired with a broader stabilization plan. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Foundation Crack Repair
| DIY | Hire a pro |
|---|---|
| Fine for a hairline crack with no water and no width change over a season | Needed when the crack is wider than a quarter inch or runs stair-step |
| Hardware-store caulk or paintable crack filler can hide a cosmetic line | Needed when the crack reappears after you've already filled it once |
| Won't stop water migration or structural movement if that's the real cause | Epoxy and polyurethane injection reach the full depth of the crack, not just the surface |
| — | A pro can tell you if the crack is cosmetic or a sign of bigger movement |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Foundation Crack Repair
Call Brigham City Foundation Pros for a free estimate before a small crack turns into a bigger repair.
- The crack is wider than a quarter inch or growing
- It runs diagonally or in a stair-step pattern through block or brick
- Water comes through only after snowmelt or heavy rain
- A crack you filled yourself has come back
- Doors or windows near the crack are sticking
Seeing warning signs?
Get a Free EstimateFAQs
Foundation Crack Repair FAQs
Is a hairline foundation crack normal or a sign of bigger problems?
Hairline cracks under a sixteenth of an inch with no water and no growth are usually cosmetic settlement. Cracks that widen, run diagonally, or leak after snowmelt point to a structural cause worth checking.
Can I just fill a foundation crack myself with epoxy from the hardware store?
For a small, stable hairline crack, yes, that can hold. It won't fix a crack caused by wall movement or hydrostatic pressure, and it can mask a problem that keeps growing underneath the patch.
How much does foundation crack repair cost in Brigham City?
Most single-crack jobs run $300 to $800. Multiple cracks, active water, or cracks tied to settlement push costs higher, typically $800 to $4,000 depending on scope.
How long does foundation crack repair take?
Most jobs are done in a single visit, with full material cure within 24 hours. We'll check back within a couple weeks if water intrusion was part of the original problem.
Do I need a permit for foundation crack repair?
Standard epoxy or polyurethane crack injection usually doesn't need a permit. If the crack is part of a larger structural repair involving piers or underpinning, that broader scope may require one.
When should I call a foundation crack repair pro?
Call when a crack is wider than a quarter inch, runs diagonally, keeps reappearing after you've filled it, or leaks water only after snowmelt.
What's the difference between epoxy and polyurethane injection?
Epoxy bonds the crack and restores structural strength, best for non-moving structural cracks. Polyurethane expands and flexes, better suited for cracks with active water intrusion.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Brigham City covering crack injection, piering, and wall stabilization, with free estimates and written scopes.
Piering and Underpinning
Steel and helical piering and underpinning in Brigham City for settling foundations, with written scopes and free estimates.
Wall Stabilization
Basement wall stabilization in Brigham City with wall anchors and carbon fiber reinforcement, free estimates available.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.